FM / amqp

/opt/imh-python/lib/python3.9/site-packages/amqp/

/opt/imh-python/lib/python3.9/site-packages/amqp

Name	Size	Mode	Actions
__pycache__/	-	0755	rm
abstract_channel.py	4941	0644	edit dl rm
basic_message.py	3357	0644	edit dl rm
channel.py	74475	0644	edit dl rm
connection.py	27541	0644	edit dl rm
exceptions.py	7166	0644	edit dl rm
method_framing.py	6734	0644	edit dl rm
platform.py	2379	0644	edit dl rm
protocol.py	291	0644	edit dl rm
sasl.py	5986	0644	edit dl rm
serialization.py	17162	0644	edit dl rm
spec.py	2121	0644	edit dl rm
transport.py	23046	0644	edit dl rm
utils.py	1456	0644	edit dl rm
__init__.py	2357	0644	edit dl rm

Edit: /opt/imh-python/lib/python3.9/site-packages/amqp/channel.py (74475B)

"""AMQP Channels."""
# Copyright (C) 2007-2008 Barry Pederson <bp@barryp.org>

import logging
import socket
from collections import defaultdict
from queue import Queue

from vine import ensure_promise

from . import spec
from .abstract_channel import AbstractChannel
from .exceptions import (ChannelError, ConsumerCancelled, MessageNacked,
                         RecoverableChannelError, RecoverableConnectionError,
                         error_for_code)
from .protocol import queue_declare_ok_t

__all__ = ('Channel',)

AMQP_LOGGER = logging.getLogger('amqp')

REJECTED_MESSAGE_WITHOUT_CALLBACK = """\
Rejecting message with delivery tag %r for reason of having no callbacks.
consumer_tag=%r exchange=%r routing_key=%r.\
"""

class VDeprecationWarning(DeprecationWarning):
    pass

class Channel(AbstractChannel):
    """AMQP Channel.

The channel class provides methods for a client to establish a
    virtual connection - a channel - to a server and for both peers to
    operate the virtual connection thereafter.

GRAMMAR::

channel             = open-channel *use-channel close-channel
        open-channel        = C:OPEN S:OPEN-OK
        use-channel         = C:FLOW S:FLOW-OK
                            / S:FLOW C:FLOW-OK
                            / functional-class
        close-channel       = C:CLOSE S:CLOSE-OK
                            / S:CLOSE C:CLOSE-OK

Create a channel bound to a connection and using the specified
    numeric channel_id, and open on the server.

The 'auto_decode' parameter (defaults to True), indicates
    whether the library should attempt to decode the body
    of Messages to a Unicode string if there's a 'content_encoding'
    property for the message.  If there's no 'content_encoding'
    property, or the decode raises an Exception, the message body
    is left as plain bytes.
    """

_METHODS = {
        spec.method(spec.Channel.Close, 'BsBB'),
        spec.method(spec.Channel.CloseOk),
        spec.method(spec.Channel.Flow, 'b'),
        spec.method(spec.Channel.FlowOk, 'b'),
        spec.method(spec.Channel.OpenOk),
        spec.method(spec.Exchange.DeclareOk),
        spec.method(spec.Exchange.DeleteOk),
        spec.method(spec.Exchange.BindOk),
        spec.method(spec.Exchange.UnbindOk),
        spec.method(spec.Queue.BindOk),
        spec.method(spec.Queue.UnbindOk),
        spec.method(spec.Queue.DeclareOk, 'sll'),
        spec.method(spec.Queue.DeleteOk, 'l'),
        spec.method(spec.Queue.PurgeOk, 'l'),
        spec.method(spec.Basic.Cancel, 's'),
        spec.method(spec.Basic.CancelOk, 's'),
        spec.method(spec.Basic.ConsumeOk, 's'),
        spec.method(spec.Basic.Deliver, 'sLbss', content=True),
        spec.method(spec.Basic.GetEmpty, 's'),
        spec.method(spec.Basic.GetOk, 'Lbssl', content=True),
        spec.method(spec.Basic.QosOk),
        spec.method(spec.Basic.RecoverOk),
        spec.method(spec.Basic.Return, 'Bsss', content=True),
        spec.method(spec.Tx.CommitOk),
        spec.method(spec.Tx.RollbackOk),
        spec.method(spec.Tx.SelectOk),
        spec.method(spec.Confirm.SelectOk),
        spec.method(spec.Basic.Ack, 'Lb'),
        spec.method(spec.Basic.Nack, 'Lb'),
    }
    _METHODS = {m.method_sig: m for m in _METHODS}

_ALLOWED_METHODS_WHEN_CLOSING = (
        spec.Channel.Close, spec.Channel.CloseOk
    )

def __init__(self, connection,
                 channel_id=None, auto_decode=True, on_open=None):
        if channel_id:
            connection._claim_channel_id(channel_id)
        else:
            channel_id = connection._get_free_channel_id()

AMQP_LOGGER.debug('using channel_id: %s', channel_id)

super().__init__(connection, channel_id)

self.is_open = False
        self.active = True  # Flow control
        self.returned_messages = Queue()
        self.callbacks = {}
        self.cancel_callbacks = {}
        self.auto_decode = auto_decode
        self.events = defaultdict(set)
        self.no_ack_consumers = set()

self.on_open = ensure_promise(on_open)

# set first time basic_publish_confirm is called
        # and publisher confirms are enabled for this channel.
        self._confirm_selected = False
        if self.connection.confirm_publish:
            self.basic_publish = self.basic_publish_confirm

__slots__ = (
        "is_open",
        "active",
        "returned_messages",
        "callbacks",
        "cancel_callbacks",
        "events",
        "no_ack_consumers",
        "on_open",
        "_confirm_selected",
        )

def then(self, on_success, on_error=None):
        return self.on_open.then(on_success, on_error)

def _setup_listeners(self):
        self._callbacks.update({
            spec.Channel.Close: self._on_close,
            spec.Channel.CloseOk: self._on_close_ok,
            spec.Channel.Flow: self._on_flow,
            spec.Channel.OpenOk: self._on_open_ok,
            spec.Basic.Cancel: self._on_basic_cancel,
            spec.Basic.CancelOk: self._on_basic_cancel_ok,
            spec.Basic.Deliver: self._on_basic_deliver,
            spec.Basic.Return: self._on_basic_return,
            spec.Basic.Ack: self._on_basic_ack,
            spec.Basic.Nack: self._on_basic_nack,
        })

def collect(self):
        """Tear down this object.

Best called after we've agreed to close with the server.
        """
        AMQP_LOGGER.debug('Closed channel #%s', self.channel_id)
        self.is_open = False
        channel_id, self.channel_id = self.channel_id, None
        connection, self.connection = self.connection, None
        if connection:
            connection.channels.pop(channel_id, None)
            try:
                connection._used_channel_ids.remove(channel_id)
            except ValueError:
                # channel id already removed
                pass
        self.callbacks.clear()
        self.cancel_callbacks.clear()
        self.events.clear()
        self.no_ack_consumers.clear()

def _do_revive(self):
        self.is_open = False
        self.open()

def close(self, reply_code=0, reply_text='', method_sig=(0, 0),
              argsig='BsBB'):
        """Request a channel close.

This method indicates that the sender wants to close the
        channel. This may be due to internal conditions (e.g. a forced
        shut-down) or due to an error handling a specific method, i.e.
        an exception.  When a close is due to an exception, the sender
        provides the class and method id of the method which caused
        the exception.

RULE:

After sending this method any received method except
            Channel.Close-OK MUST be discarded.

RULE:

The peer sending this method MAY use a counter or timeout
            to detect failure of the other peer to respond correctly
            with Channel.Close-OK..

PARAMETERS:
            reply_code: short

The reply code. The AMQ reply codes are defined in AMQ
                RFC 011.

reply_text: shortstr

The localised reply text.  This text can be logged as an
                aid to resolving issues.

class_id: short

failing method class

When the close is provoked by a method exception, this
                is the class of the method.

method_id: short

failing method ID

When the close is provoked by a method exception, this
                is the ID of the method.
        """
        try:
            if self.connection is None:
                return
            if self.connection.channels is None:
                return
            if not self.is_open:
                return

self.is_closing = True
            return self.send_method(
                spec.Channel.Close, argsig,
                (reply_code, reply_text, method_sig[0], method_sig[1]),
                wait=spec.Channel.CloseOk,
            )
        finally:
            self.is_closing = False
            self.connection = None

def _on_close(self, reply_code, reply_text, class_id, method_id):
        """Request a channel close.

RULE:

After sending this method any received method except
            Channel.Close-OK MUST be discarded.

RULE:

The peer sending this method MAY use a counter or timeout
            to detect failure of the other peer to respond correctly
            with Channel.Close-OK..

PARAMETERS:
            reply_code: short

The reply code. The AMQ reply codes are defined in AMQ
                RFC 011.

reply_text: shortstr

The localised reply text.  This text can be logged as an
                aid to resolving issues.

class_id: short

failing method class

When the close is provoked by a method exception, this
                is the class of the method.

method_id: short

failing method ID

When the close is provoked by a method exception, this
                is the ID of the method.
        """
        self.send_method(spec.Channel.CloseOk)
        if not self.connection.is_closing:
            self._do_revive()
            raise error_for_code(
                reply_code, reply_text, (class_id, method_id), ChannelError,
            )

def _on_close_ok(self):
        """Confirm a channel close.

This method confirms a Channel.Close method and tells the
        recipient that it is safe to release resources for the channel
        and close the socket.

RULE:

A peer that detects a socket closure without having
            received a Channel.Close-Ok handshake method SHOULD log
            the error.
        """
        self.collect()

def flow(self, active):
        """Enable/disable flow from peer.

This method asks the peer to pause or restart the flow of
        content data. This is a simple flow-control mechanism that a
        peer can use to avoid overflowing its queues or otherwise
        finding itself receiving more messages than it can process.
        Note that this method is not intended for window control.  The
        peer that receives a request to stop sending content should
        finish sending the current content, if any, and then wait
        until it receives a Flow restart method.

RULE:

When a new channel is opened, it is active.  Some
            applications assume that channels are inactive until
            started.  To emulate this behaviour a client MAY open the
            channel, then pause it.

RULE:

When sending content data in multiple frames, a peer
            SHOULD monitor the channel for incoming methods and
            respond to a Channel.Flow as rapidly as possible.

RULE:

A peer MAY use the Channel.Flow method to throttle
            incoming content data for internal reasons, for example,
            when exchanging data over a slower connection.

RULE:

The peer that requests a Channel.Flow method MAY
            disconnect and/or ban a peer that does not respect the
            request.

PARAMETERS:
            active: boolean

start/stop content frames

If True, the peer starts sending content frames.  If
                False, the peer stops sending content frames.
        """
        return self.send_method(
            spec.Channel.Flow, 'b', (active,), wait=spec.Channel.FlowOk,
        )

def _on_flow(self, active):
        """Enable/disable flow from peer.

RULE:

When sending content data in multiple frames, a peer
            SHOULD monitor the channel for incoming methods and
            respond to a Channel.Flow as rapidly as possible.

RULE:

A peer MAY use the Channel.Flow method to throttle
            incoming content data for internal reasons, for example,
            when exchanging data over a slower connection.

RULE:

The peer that requests a Channel.Flow method MAY
            disconnect and/or ban a peer that does not respect the
            request.

PARAMETERS:
            active: boolean

start/stop content frames

If True, the peer starts sending content frames.  If
                False, the peer stops sending content frames.
        """
        self.active = active
        self._x_flow_ok(self.active)

def _x_flow_ok(self, active):
        """Confirm a flow method.

Confirms to the peer that a flow command was received and
        processed.

PARAMETERS:
            active: boolean

current flow setting

Confirms the setting of the processed flow method:
                True means the peer will start sending or continue
                to send content frames; False means it will not.
        """
        return self.send_method(spec.Channel.FlowOk, 'b', (active,))

def open(self):
        """Open a channel for use.

This method opens a virtual connection (a channel).

RULE:

This method MUST NOT be called when the channel is already
            open.

PARAMETERS:
            out_of_band: shortstr (DEPRECATED)

out-of-band settings

Configures out-of-band transfers on this channel.  The
                syntax and meaning of this field will be formally
                defined at a later date.
        """
        if self.is_open:
            return

return self.send_method(
            spec.Channel.Open, 's', ('',), wait=spec.Channel.OpenOk,
        )

def _on_open_ok(self):
        """Signal that the channel is ready.

This method signals to the client that the channel is ready
        for use.
        """
        self.is_open = True
        self.on_open(self)
        AMQP_LOGGER.debug('Channel open')

#############
    #
    #  Exchange
    #
    #
    # work with exchanges
    #
    # Exchanges match and distribute messages across queues.
    # Exchanges can be configured in the server or created at runtime.
    #
    # GRAMMAR::
    #
    #     exchange            = C:DECLARE  S:DECLARE-OK
    #                         / C:DELETE   S:DELETE-OK
    #
    # RULE:
    #
    #     The server MUST implement the direct and fanout exchange
    #     types, and predeclare the corresponding exchanges named
    #     amq.direct and amq.fanout in each virtual host. The server
    #     MUST also predeclare a direct exchange to act as the default
    #     exchange for content Publish methods and for default queue
    #     bindings.
    #
    # RULE:
    #
    #     The server SHOULD implement the topic exchange type, and
    #     predeclare the corresponding exchange named amq.topic in
    #     each virtual host.
    #
    # RULE:
    #
    #     The server MAY implement the system exchange type, and
    #     predeclare the corresponding exchanges named amq.system in
    #     each virtual host. If the client attempts to bind a queue to
    #     the system exchange, the server MUST raise a connection
    #     exception with reply code 507 (not allowed).
    #

def exchange_declare(self, exchange, type, passive=False, durable=False,
                         auto_delete=True, nowait=False, arguments=None,
                         argsig='BssbbbbbF'):
        """Declare exchange, create if needed.

This method creates an exchange if it does not already exist,
        and if the exchange exists, verifies that it is of the correct
        and expected class.

RULE:

The server SHOULD support a minimum of 16 exchanges per
            virtual host and ideally, impose no limit except as
            defined by available resources.

PARAMETERS:
            exchange: shortstr

RULE:

Exchange names starting with "amq." are reserved
                    for predeclared and standardised exchanges.  If
                    the client attempts to create an exchange starting
                    with "amq.", the server MUST raise a channel
                    exception with reply code 403 (access refused).

type: shortstr

exchange type

Each exchange belongs to one of a set of exchange
                types implemented by the server.  The exchange types
                define the functionality of the exchange - i.e. how
                messages are routed through it.  It is not valid or
                meaningful to attempt to change the type of an
                existing exchange.

RULE:

If the exchange already exists with a different
                    type, the server MUST raise a connection exception
                    with a reply code 507 (not allowed).

RULE:

If the server does not support the requested
                    exchange type it MUST raise a connection exception
                    with a reply code 503 (command invalid).

passive: boolean

do not create exchange

If set, the server will not create the exchange.  The
                client can use this to check whether an exchange
                exists without modifying the server state.

RULE:

If set, and the exchange does not already exist,
                    the server MUST raise a channel exception with
                    reply code 404 (not found).

durable: boolean

request a durable exchange

If set when creating a new exchange, the exchange will
                be marked as durable.  Durable exchanges remain active
                when a server restarts. Non-durable exchanges
                (transient exchanges) are purged if/when a server
                restarts.

RULE:

The server MUST support both durable and transient
                    exchanges.

RULE:

The server MUST ignore the durable field if the
                    exchange already exists.

auto_delete: boolean

auto-delete when unused

If set, the exchange is deleted when all queues have
                finished using it.

RULE:

The server SHOULD allow for a reasonable delay
                    between the point when it determines that an
                    exchange is not being used (or no longer used),
                    and the point when it deletes the exchange.  At
                    the least it must allow a client to create an
                    exchange and then bind a queue to it, with a small
                    but non-zero delay between these two actions.

RULE:

The server MUST ignore the auto-delete field if
                    the exchange already exists.

nowait: boolean

do not send a reply method

arguments: table

arguments for declaration

A set of arguments for the declaration. The syntax and
                semantics of these arguments depends on the server
                implementation.  This field is ignored if passive is
                True.
        """
        self.send_method(
            spec.Exchange.Declare, argsig,
            (0, exchange, type, passive, durable, auto_delete,
             False, nowait, arguments),
            wait=None if nowait else spec.Exchange.DeclareOk,
        )

def exchange_delete(self, exchange, if_unused=False, nowait=False,
                        argsig='Bsbb'):
        """Delete an exchange.

This method deletes an exchange.  When an exchange is deleted
        all queue bindings on the exchange are cancelled.

PARAMETERS:
            exchange: shortstr

RULE:

The exchange MUST exist. Attempting to delete a
                    non-existing exchange causes a channel exception.

if_unused: boolean

delete only if unused

If set, the server will only delete the exchange if it
                has no queue bindings. If the exchange has queue
                bindings the server does not delete it but raises a
                channel exception instead.

RULE:

If set, the server SHOULD delete the exchange but
                    only if it has no queue bindings.

RULE:

If set, the server SHOULD raise a channel
                    exception if the exchange is in use.

nowait: boolean

do not send a reply method

If set, the server will not respond to the method. The
                client should not wait for a reply method.  If the
                server could not complete the method it will raise a
                channel or connection exception.
        """
        return self.send_method(
            spec.Exchange.Delete, argsig, (0, exchange, if_unused, nowait),
            wait=None if nowait else spec.Exchange.DeleteOk,
        )

def exchange_bind(self, destination, source='', routing_key='',
                      nowait=False, arguments=None, argsig='BsssbF'):
        """Bind an exchange to an exchange.

RULE:

A server MUST allow and ignore duplicate bindings - that
            is, two or more bind methods for a specific exchanges,
            with identical arguments - without treating these as an
            error.

RULE:

A server MUST allow cycles of exchange bindings to be
            created including allowing an exchange to be bound to
            itself.

RULE:

A server MUST not deliver the same message more than once
            to a destination exchange, even if the topology of
            exchanges and bindings results in multiple (even infinite)
            routes to that exchange.

PARAMETERS:
            reserved-1: short

destination: shortstr

Specifies the name of the destination exchange to
                bind.

RULE:

A client MUST NOT be allowed to bind a non-
                    existent destination exchange.

RULE:

The server MUST accept a blank exchange name to
                    mean the default exchange.

source: shortstr

Specifies the name of the source exchange to bind.

RULE:

A client MUST NOT be allowed to bind a non-
                    existent source exchange.

RULE:

The server MUST accept a blank exchange name to
                    mean the default exchange.

routing-key: shortstr

no-wait: bit

arguments: table

A set of arguments for the binding. The syntax and
                semantics of these arguments depends on the exchange
                class.
        """
        return self.send_method(
            spec.Exchange.Bind, argsig,
            (0, destination, source, routing_key, nowait, arguments),
            wait=None if nowait else spec.Exchange.BindOk,
        )

def exchange_unbind(self, destination, source='', routing_key='',
                        nowait=False, arguments=None, argsig='BsssbF'):
        """Unbind an exchange from an exchange.

RULE:

If a unbind fails, the server MUST raise a connection
            exception.

PARAMETERS:
            reserved-1: short

destination: shortstr

Specifies the name of the destination exchange to
                unbind.

RULE:

The client MUST NOT attempt to unbind an exchange
                    that does not exist from an exchange.

RULE:

The server MUST accept a blank exchange name to
                    mean the default exchange.

source: shortstr

Specifies the name of the source exchange to unbind.

RULE:

The client MUST NOT attempt to unbind an exchange
                    from an exchange that does not exist.

RULE:

The server MUST accept a blank exchange name to
                    mean the default exchange.

routing-key: shortstr

Specifies the routing key of the binding to unbind.

no-wait: bit

arguments: table

Specifies the arguments of the binding to unbind.
        """
        return self.send_method(
            spec.Exchange.Unbind, argsig,
            (0, destination, source, routing_key, nowait, arguments),
            wait=None if nowait else spec.Exchange.UnbindOk,
        )

#############
    #
    #  Queue
    #
    #
    # work with queues
    #
    # Queues store and forward messages.  Queues can be configured in
    # the server or created at runtime.  Queues must be attached to at
    # least one exchange in order to receive messages from publishers.
    #
    # GRAMMAR::
    #
    #     queue               = C:DECLARE  S:DECLARE-OK
    #                         / C:BIND     S:BIND-OK
    #                         / C:PURGE    S:PURGE-OK
    #                         / C:DELETE   S:DELETE-OK
    #
    # RULE:
    #
    #     A server MUST allow any content class to be sent to any
    #     queue, in any mix, and queue and delivery these content
    #     classes independently. Note that all methods that fetch
    #     content off queues are specific to a given content class.
    #

def queue_bind(self, queue, exchange='', routing_key='',
                   nowait=False, arguments=None, argsig='BsssbF'):
        """Bind queue to an exchange.

This method binds a queue to an exchange.  Until a queue is
        bound it will not receive any messages.  In a classic
        messaging model, store-and-forward queues are bound to a dest
        exchange and subscription queues are bound to a dest_wild
        exchange.

RULE:

A server MUST allow ignore duplicate bindings - that is,
            two or more bind methods for a specific queue, with
            identical arguments - without treating these as an error.

RULE:

If a bind fails, the server MUST raise a connection
            exception.

RULE:

The server MUST NOT allow a durable queue to bind to a
            transient exchange. If the client attempts this the server
            MUST raise a channel exception.

RULE:

Bindings for durable queues are automatically durable and
            the server SHOULD restore such bindings after a server
            restart.

RULE:

The server SHOULD support at least 4 bindings per queue,
            and ideally, impose no limit except as defined by
            available resources.

PARAMETERS:
            queue: shortstr

Specifies the name of the queue to bind.  If the queue
                name is empty, refers to the current queue for the
                channel, which is the last declared queue.

RULE:

If the client did not previously declare a queue,
                    and the queue name in this method is empty, the
                    server MUST raise a connection exception with
                    reply code 530 (not allowed).

RULE:

If the queue does not exist the server MUST raise
                    a channel exception with reply code 404 (not
                    found).

exchange: shortstr

The name of the exchange to bind to.

RULE:

If the exchange does not exist the server MUST
                    raise a channel exception with reply code 404 (not
                    found).

routing_key: shortstr

message routing key

Specifies the routing key for the binding.  The
                routing key is used for routing messages depending on
                the exchange configuration. Not all exchanges use a
                routing key - refer to the specific exchange
                documentation.  If the routing key is empty and the
                queue name is empty, the routing key will be the
                current queue for the channel, which is the last
                declared queue.

nowait: boolean

do not send a reply method

arguments: table

arguments for binding

A set of arguments for the binding.  The syntax and
                semantics of these arguments depends on the exchange
                class.
        """
        return self.send_method(
            spec.Queue.Bind, argsig,
            (0, queue, exchange, routing_key, nowait, arguments),
            wait=None if nowait else spec.Queue.BindOk,
        )

def queue_unbind(self, queue, exchange, routing_key='',
                     nowait=False, arguments=None, argsig='BsssF'):
        """Unbind a queue from an exchange.

This method unbinds a queue from an exchange.

RULE:

If a unbind fails, the server MUST raise a connection exception.

PARAMETERS:
            queue: shortstr

Specifies the name of the queue to unbind.

RULE:

The client MUST either specify a queue name or have
                    previously declared a queue on the same channel

RULE:

The client MUST NOT attempt to unbind a queue that
                    does not exist.

exchange: shortstr

The name of the exchange to unbind from.

RULE:

The client MUST NOT attempt to unbind a queue from an
                    exchange that does not exist.

RULE:

The server MUST accept a blank exchange name to mean
                    the default exchange.

routing_key: shortstr

routing key of binding

Specifies the routing key of the binding to unbind.

arguments: table

arguments of binding

Specifies the arguments of the binding to unbind.
        """
        return self.send_method(
            spec.Queue.Unbind, argsig,
            (0, queue, exchange, routing_key, arguments),
            wait=None if nowait else spec.Queue.UnbindOk,
        )

def queue_declare(self, queue='', passive=False, durable=False,
                      exclusive=False, auto_delete=True, nowait=False,
                      arguments=None, argsig='BsbbbbbF'):
        """Declare queue, create if needed.

This method creates or checks a queue.  When creating a new
        queue the client can specify various properties that control
        the durability of the queue and its contents, and the level of
        sharing for the queue.

RULE:

The server MUST create a default binding for a newly-
            created queue to the default exchange, which is an
            exchange of type 'direct'.

RULE:

The server SHOULD support a minimum of 256 queues per
            virtual host and ideally, impose no limit except as
            defined by available resources.

PARAMETERS:
            queue: shortstr

RULE:

The queue name MAY be empty, in which case the
                    server MUST create a new queue with a unique
                    generated name and return this to the client in
                    the Declare-Ok method.

RULE:

Queue names starting with "amq." are reserved for
                    predeclared and standardised server queues.  If
                    the queue name starts with "amq." and the passive
                    option is False, the server MUST raise a connection
                    exception with reply code 403 (access refused).

passive: boolean

do not create queue

If set, the server will not create the queue.  The
                client can use this to check whether a queue exists
                without modifying the server state.

RULE:

If set, and the queue does not already exist, the
                    server MUST respond with a reply code 404 (not
                    found) and raise a channel exception.

durable: boolean

request a durable queue

If set when creating a new queue, the queue will be
                marked as durable.  Durable queues remain active when
                a server restarts. Non-durable queues (transient
                queues) are purged if/when a server restarts.  Note
                that durable queues do not necessarily hold persistent
                messages, although it does not make sense to send
                persistent messages to a transient queue.

RULE:

The server MUST recreate the durable queue after a
                    restart.

RULE:

The server MUST support both durable and transient
                    queues.

RULE:

The server MUST ignore the durable field if the
                    queue already exists.

exclusive: boolean

request an exclusive queue

Exclusive queues may only be consumed from by the
                current connection. Setting the 'exclusive' flag
                always implies 'auto-delete'.

RULE:

The server MUST support both exclusive (private)
                    and non-exclusive (shared) queues.

RULE:

The server MUST raise a channel exception if
                    'exclusive' is specified and the queue already
                    exists and is owned by a different connection.

auto_delete: boolean

auto-delete queue when unused

If set, the queue is deleted when all consumers have
                finished using it. Last consumer can be cancelled
                either explicitly or because its channel is closed. If
                there was no consumer ever on the queue, it won't be
                deleted.

RULE:

The server SHOULD allow for a reasonable delay
                    between the point when it determines that a queue
                    is not being used (or no longer used), and the
                    point when it deletes the queue.  At the least it
                    must allow a client to create a queue and then
                    create a consumer to read from it, with a small
                    but non-zero delay between these two actions.  The
                    server should equally allow for clients that may
                    be disconnected prematurely, and wish to re-
                    consume from the same queue without losing
                    messages.  We would recommend a configurable
                    timeout, with a suitable default value being one
                    minute.

RULE:

The server MUST ignore the auto-delete field if
                    the queue already exists.

nowait: boolean

do not send a reply method

arguments: table

arguments for declaration

A set of arguments for the declaration. The syntax and
                semantics of these arguments depends on the server
                implementation.  This field is ignored if passive is
                True.

Returns a tuple containing 3 items:
            the name of the queue (essential for automatically-named queues),
            message count and
            consumer count
        """
        self.send_method(
            spec.Queue.Declare, argsig,
            (0, queue, passive, durable, exclusive, auto_delete,
             nowait, arguments),
        )
        if not nowait:
            return queue_declare_ok_t(*self.wait(
                spec.Queue.DeclareOk, returns_tuple=True,
            ))

def queue_delete(self, queue='',
                     if_unused=False, if_empty=False, nowait=False,
                     argsig='Bsbbb'):
        """Delete a queue.

This method deletes a queue.  When a queue is deleted any
        pending messages are sent to a dead-letter queue if this is
        defined in the server configuration, and all consumers on the
        queue are cancelled.

RULE:

The server SHOULD use a dead-letter queue to hold messages
            that were pending on a deleted queue, and MAY provide
            facilities for a system administrator to move these
            messages back to an active queue.

PARAMETERS:
            queue: shortstr

Specifies the name of the queue to delete. If the
                queue name is empty, refers to the current queue for
                the channel, which is the last declared queue.

RULE:

The queue must exist. Attempting to delete a non-
                    existing queue causes a channel exception.

if_unused: boolean

delete only if unused

If set, the server will only delete the queue if it
                has no consumers. If the queue has consumers the
                server does does not delete it but raises a channel
                exception instead.

RULE:

The server MUST respect the if-unused flag when
                    deleting a queue.

if_empty: boolean

delete only if empty

If set, the server will only delete the queue if it
                has no messages. If the queue is not empty the server
                raises a channel exception.

nowait: boolean

do not send a reply method

If nowait is False, returns the number of deleted messages.
        """
        return self.send_method(
            spec.Queue.Delete, argsig,
            (0, queue, if_unused, if_empty, nowait),
            wait=None if nowait else spec.Queue.DeleteOk,
        )

def queue_purge(self, queue='', nowait=False, argsig='Bsb'):
        """Purge a queue.

This method removes all messages from a queue.  It does not
        cancel consumers.  Purged messages are deleted without any
        formal "undo" mechanism.

RULE:

A call to purge MUST result in an empty queue.

RULE:

On transacted channels the server MUST not purge messages
            that have already been sent to a client but not yet
            acknowledged.

RULE:

The server MAY implement a purge queue or log that allows
            system administrators to recover accidentally-purged
            messages.  The server SHOULD NOT keep purged messages in
            the same storage spaces as the live messages since the
            volumes of purged messages may get very large.

PARAMETERS:
            queue: shortstr

Specifies the name of the queue to purge.  If the
                queue name is empty, refers to the current queue for
                the channel, which is the last declared queue.

RULE:

The queue must exist. Attempting to purge a non-
                    existing queue causes a channel exception.

nowait: boolean

do not send a reply method

If nowait is False, returns a number of purged messages.
        """
        return self.send_method(
            spec.Queue.Purge, argsig, (0, queue, nowait),
            wait=None if nowait else spec.Queue.PurgeOk,
        )

#############
    #
    #  Basic
    #
    #
    # work with basic content
    #
    # The Basic class provides methods that support an industry-
    # standard messaging model.
    #
    # GRAMMAR::
    #
    #     basic               = C:QOS S:QOS-OK
    #                         / C:CONSUME S:CONSUME-OK
    #                         / C:CANCEL S:CANCEL-OK
    #                         / C:PUBLISH content
    #                         / S:RETURN content
    #                         / S:DELIVER content
    #                         / C:GET ( S:GET-OK content / S:GET-EMPTY )
    #                         / C:ACK
    #                         / C:REJECT
    #
    # RULE:
    #
    #     The server SHOULD respect the persistent property of basic
    #     messages and SHOULD make a best-effort to hold persistent
    #     basic messages on a reliable storage mechanism.
    #
    # RULE:
    #
    #     The server MUST NOT discard a persistent basic message in
    #     case of a queue overflow. The server MAY use the
    #     Channel.Flow method to slow or stop a basic message
    #     publisher when necessary.
    #
    # RULE:
    #
    #     The server MAY overflow non-persistent basic messages to
    #     persistent storage and MAY discard or dead-letter non-
    #     persistent basic messages on a priority basis if the queue
    #     size exceeds some configured limit.
    #
    # RULE:
    #
    #     The server MUST implement at least 2 priority levels for
    #     basic messages, where priorities 0-4 and 5-9 are treated as
    #     two distinct levels. The server MAY implement up to 10
    #     priority levels.
    #
    # RULE:
    #
    #     The server MUST deliver messages of the same priority in
    #     order irrespective of their individual persistence.
    #
    # RULE:
    #
    #     The server MUST support both automatic and explicit
    #     acknowledgments on Basic content.
    #

def basic_ack(self, delivery_tag, multiple=False, argsig='Lb'):
        """Acknowledge one or more messages.

This method acknowledges one or more messages delivered via
        the Deliver or Get-Ok methods.  The client can ask to confirm
        a single message or a set of messages up to and including a
        specific message.

PARAMETERS:
            delivery_tag: longlong

server-assigned delivery tag

The server-assigned and channel-specific delivery tag

RULE:

The delivery tag is valid only within the channel
                    from which the message was received.  I.e. a client
                    MUST NOT receive a message on one channel and then
                    acknowledge it on another.

RULE:

The server MUST NOT use a zero value for delivery
                    tags.  Zero is reserved for client use, meaning "all
                    messages so far received".

multiple: boolean

acknowledge multiple messages

If set to True, the delivery tag is treated as "up to
                and including", so that the client can acknowledge
                multiple messages with a single method.  If set to
                False, the delivery tag refers to a single message.
                If the multiple field is True, and the delivery tag
                is zero, tells the server to acknowledge all
                outstanding messages.

RULE:

The server MUST validate that a non-zero delivery-
                    tag refers to an delivered message, and raise a
                    channel exception if this is not the case.
        """
        return self.send_method(
            spec.Basic.Ack, argsig, (delivery_tag, multiple),
        )

def basic_cancel(self, consumer_tag, nowait=False, argsig='sb'):
        """End a queue consumer.

This method cancels a consumer. This does not affect already
        delivered messages, but it does mean the server will not send
        any more messages for that consumer.  The client may receive
        an arbitrary number of messages in between sending the cancel
        method and receiving the cancel-ok reply.

RULE:

If the queue no longer exists when the client sends a
            cancel command, or the consumer has been cancelled for
            other reasons, this command has no effect.

PARAMETERS:
            consumer_tag: shortstr

consumer tag

Identifier for the consumer, valid within the current
                connection.

RULE:

The consumer tag is valid only within the channel
                    from which the consumer was created. I.e. a client
                    MUST NOT create a consumer in one channel and then
                    use it in another.

nowait: boolean

do not send a reply method

If set, the server will not respond to the method. The
                client should not wait for a reply method.  If the
                server could not complete the method it will raise a
                channel or connection exception.
        """
        if self.connection is not None:
            self.no_ack_consumers.discard(consumer_tag)
            return self.send_method(
                spec.Basic.Cancel, argsig, (consumer_tag, nowait),
                wait=None if nowait else spec.Basic.CancelOk,
            )

def _on_basic_cancel(self, consumer_tag):
        """Consumer cancelled by server.

Most likely the queue was deleted.

"""
        callback = self._remove_tag(consumer_tag)
        if callback:
            callback(consumer_tag)
        else:
            raise ConsumerCancelled(consumer_tag, spec.Basic.Cancel)

def _on_basic_cancel_ok(self, consumer_tag):
        self._remove_tag(consumer_tag)

def _remove_tag(self, consumer_tag):
        self.callbacks.pop(consumer_tag, None)
        return self.cancel_callbacks.pop(consumer_tag, None)

def basic_consume(self, queue='', consumer_tag='', no_local=False,
                      no_ack=False, exclusive=False, nowait=False,
                      callback=None, arguments=None, on_cancel=None,
                      argsig='BssbbbbF'):
        """Start a queue consumer.

This method asks the server to start a "consumer", which is a
        transient request for messages from a specific queue.
        Consumers last as long as the channel they were created on, or
        until the client cancels them.

RULE:

The server SHOULD support at least 16 consumers per queue,
            unless the queue was declared as private, and ideally,
            impose no limit except as defined by available resources.

PARAMETERS:
            queue: shortstr

Specifies the name of the queue to consume from.  If
                the queue name is null, refers to the current queue
                for the channel, which is the last declared queue.

RULE:

consumer_tag: shortstr

Specifies the identifier for the consumer. The
                consumer tag is local to a connection, so two clients
                can use the same consumer tags. If this field is empty
                the server will generate a unique tag.

RULE:

The tag MUST NOT refer to an existing consumer. If
                    the client attempts to create two consumers with
                    the same non-empty tag the server MUST raise a
                    connection exception with reply code 530 (not
                    allowed).

no_local: boolean

do not deliver own messages

If the no-local field is set the server will not send
                messages to the client that published them.

no_ack: boolean

no acknowledgment needed

If this field is set the server does not expect
                acknowledgments for messages.  That is, when a message
                is delivered to the client the server automatically and
                silently acknowledges it on behalf of the client.  This
                functionality increases performance but at the cost of
                reliability.  Messages can get lost if a client dies
                before it can deliver them to the application.

exclusive: boolean

request exclusive access

Request exclusive consumer access, meaning only this
                consumer can access the queue.

RULE:

If the server cannot grant exclusive access to the
                    queue when asked, - because there are other
                    consumers active - it MUST raise a channel
                    exception with return code 403 (access refused).

nowait: boolean

do not send a reply method

callback: Python callable

function/method called with each delivered message

For each message delivered by the broker, the
                callable will be called with a Message object
                as the single argument.  If no callable is specified,
                messages are quietly discarded, no_ack should probably
                be set to True in that case.
        """
        p = self.send_method(
            spec.Basic.Consume, argsig,
            (
                0, queue, consumer_tag, no_local, no_ack, exclusive,
                nowait, arguments
            ),
            wait=None if nowait else spec.Basic.ConsumeOk,
            returns_tuple=True
        )

if not nowait:
            # send_method() returns (consumer_tag,) tuple.
            # consumer_tag is returned by broker using following rules:
            # * consumer_tag is not specified by client, random one
            #   is generated by Broker
            # * consumer_tag is provided by client, the same one
            #   is returned by broker
            consumer_tag = p[0]
        elif nowait and not consumer_tag:
            raise ValueError(
                'Consumer tag must be specified when nowait is True'
            )

self.callbacks[consumer_tag] = callback

if on_cancel:
            self.cancel_callbacks[consumer_tag] = on_cancel
        if no_ack:
            self.no_ack_consumers.add(consumer_tag)

if not nowait:
            return consumer_tag
        else:
            return p

def _on_basic_deliver(self, consumer_tag, delivery_tag, redelivered,
                          exchange, routing_key, msg):
        msg.channel = self
        msg.delivery_info = {
            'consumer_tag': consumer_tag,
            'delivery_tag': delivery_tag,
            'redelivered': redelivered,
            'exchange': exchange,
            'routing_key': routing_key,
        }

try:
            fun = self.callbacks[consumer_tag]
        except KeyError:
            AMQP_LOGGER.warning(
                REJECTED_MESSAGE_WITHOUT_CALLBACK,
                delivery_tag, consumer_tag, exchange, routing_key,
            )
            self.basic_reject(delivery_tag, requeue=True)
        else:
            fun(msg)

def basic_get(self, queue='', no_ack=False, argsig='Bsb'):
        """Direct access to a queue.

This method provides a direct access to the messages in a
        queue using a synchronous dialogue that is designed for
        specific types of application where synchronous functionality
        is more important than performance.

PARAMETERS:
            queue: shortstr

Specifies the name of the queue to consume from.  If
                the queue name is null, refers to the current queue
                for the channel, which is the last declared queue.

RULE:

no_ack: boolean

no acknowledgment needed

Non-blocking, returns a amqp.basic_message.Message object,
        or None if queue is empty.
        """
        ret = self.send_method(
            spec.Basic.Get, argsig, (0, queue, no_ack),
            wait=[spec.Basic.GetOk, spec.Basic.GetEmpty], returns_tuple=True,
        )
        if not ret or len(ret) < 2:
            return self._on_get_empty(*ret)
        return self._on_get_ok(*ret)

def _on_get_empty(self, cluster_id=None):
        pass

def _on_get_ok(self, delivery_tag, redelivered, exchange, routing_key,
                   message_count, msg):
        msg.channel = self
        msg.delivery_info = {
            'delivery_tag': delivery_tag,
            'redelivered': redelivered,
            'exchange': exchange,
            'routing_key': routing_key,
            'message_count': message_count
        }
        return msg

def _basic_publish(self, msg, exchange='', routing_key='',
                       mandatory=False, immediate=False, timeout=None,
                       confirm_timeout=None,
                       argsig='Bssbb'):
        """Publish a message.

This method publishes a message to a specific exchange. The
        message will be routed to queues as defined by the exchange
        configuration and distributed to any active consumers when the
        transaction, if any, is committed.

When channel is in confirm mode (when Connection parameter
        confirm_publish is set to True), each message is confirmed.
        When broker rejects published message (e.g. due internal broker
        constrains), MessageNacked exception is raised and
        set confirm_timeout to wait maximum confirm_timeout second
        for message to confirm.

PARAMETERS:
            exchange: shortstr

Specifies the name of the exchange to publish to.  The
                exchange name can be empty, meaning the default
                exchange.  If the exchange name is specified, and that
                exchange does not exist, the server will raise a
                channel exception.

RULE:

The server MUST accept a blank exchange name to
                    mean the default exchange.

RULE:

The exchange MAY refuse basic content in which
                    case it MUST raise a channel exception with reply
                    code 540 (not implemented).

routing_key: shortstr

Message routing key

Specifies the routing key for the message.  The
                routing key is used for routing messages depending on
                the exchange configuration.

mandatory: boolean

indicate mandatory routing

This flag tells the server how to react if the message
                cannot be routed to a queue.  If this flag is True, the
                server will return an unroutable message with a Return
                method.  If this flag is False, the server silently
                drops the message.

RULE:

The server SHOULD implement the mandatory flag.

immediate: boolean

request immediate delivery

This flag tells the server how to react if the message
                cannot be routed to a queue consumer immediately.  If
                this flag is set, the server will return an
                undeliverable message with a Return method. If this
                flag is zero, the server will queue the message, but
                with no guarantee that it will ever be consumed.

RULE:

The server SHOULD implement the immediate flag.

timeout: short

timeout for publish

Set timeout to wait maximum timeout second
                for message to publish.

confirm_timeout: short

confirm_timeout for publish in confirm mode

When the channel is in confirm mode set
                confirm_timeout to wait maximum confirm_timeout
                second for message to confirm.

"""
        if not self.connection:
            raise RecoverableConnectionError(
                'basic_publish: connection closed')

capabilities = self.connection. \
            client_properties.get('capabilities', {})
        if capabilities.get('connection.blocked', False):
            try:
                # Check if an event was sent, such as the out of memory message
                self.connection.drain_events(timeout=0)
            except socket.timeout:
                pass

try:
            with self.connection.transport.having_timeout(timeout):
                return self.send_method(
                    spec.Basic.Publish, argsig,
                    (0, exchange, routing_key, mandatory, immediate), msg
                )
        except socket.timeout:
            raise RecoverableChannelError('basic_publish: timed out')

basic_publish = _basic_publish

def basic_publish_confirm(self, *args, **kwargs):
        confirm_timeout = kwargs.pop('confirm_timeout', None)

def confirm_handler(method, *args):
            # When RMQ nacks message we are raising MessageNacked exception
            if method == spec.Basic.Nack:
                raise MessageNacked()

if not self._confirm_selected:
            self._confirm_selected = True
            self.confirm_select()
        ret = self._basic_publish(*args, **kwargs)
        # Waiting for confirmation of message.
        timeout = confirm_timeout or kwargs.get('timeout', None)
        self.wait([spec.Basic.Ack, spec.Basic.Nack],
                  callback=confirm_handler,
                  timeout=timeout)
        return ret

def basic_qos(self, prefetch_size, prefetch_count, a_global,
                  argsig='lBb'):
        """Specify quality of service.

This method requests a specific quality of service.  The QoS
        can be specified for the current channel or for all channels
        on the connection.  The particular properties and semantics of
        a qos method always depend on the content class semantics.
        Though the qos method could in principle apply to both peers,
        it is currently meaningful only for the server.

PARAMETERS:
            prefetch_size: long

prefetch window in octets

The client can request that messages be sent in
                advance so that when the client finishes processing a
                message, the following message is already held
                locally, rather than needing to be sent down the
                channel.  Prefetching gives a performance improvement.
                This field specifies the prefetch window size in
                octets.  The server will send a message in advance if
                it is equal to or smaller in size than the available
                prefetch size (and also falls into other prefetch
                limits). May be set to zero, meaning "no specific
                limit", although other prefetch limits may still
                apply. The prefetch-size is ignored if the no-ack
                option is set.

RULE:

The server MUST ignore this setting when the
                    client is not processing any messages - i.e. the
                    prefetch size does not limit the transfer of
                    single messages to a client, only the sending in
                    advance of more messages while the client still
                    has one or more unacknowledged messages.

prefetch_count: short

prefetch window in messages

Specifies a prefetch window in terms of whole
                messages.  This field may be used in combination with
                the prefetch-size field; a message will only be sent
                in advance if both prefetch windows (and those at the
                channel and connection level) allow it. The prefetch-
                count is ignored if the no-ack option is set.

RULE:

The server MAY send less data in advance than
                    allowed by the client's specified prefetch windows
                    but it MUST NOT send more.

a_global: boolean

Defines a scope of QoS. Semantics of this parameter differs
                between AMQP 0-9-1 standard and RabbitMQ broker:

MEANING IN AMQP 0-9-1:
                    False:  shared across all consumers on the channel
                    True:   shared across all consumers on the connection
                MEANING IN RABBITMQ:
                    False:  applied separately to each new consumer
                            on the channel
                    True:   shared across all consumers on the channel
        """
        return self.send_method(
            spec.Basic.Qos, argsig, (prefetch_size, prefetch_count, a_global),
            wait=spec.Basic.QosOk,
        )

def basic_recover(self, requeue=False):
        """Redeliver unacknowledged messages.

This method asks the broker to redeliver all unacknowledged
        messages on a specified channel. Zero or more messages may be
        redelivered.  This method is only allowed on non-transacted
        channels.

RULE:

The server MUST set the redelivered flag on all messages
            that are resent.

RULE:

The server MUST raise a channel exception if this is
            called on a transacted channel.

PARAMETERS:
            requeue: boolean

requeue the message

If this field is False, the message will be redelivered
                to the original recipient.  If this field is True, the
                server will attempt to requeue the message,
                potentially then delivering it to an alternative
                subscriber.
        """
        return self.send_method(spec.Basic.Recover, 'b', (requeue,))

def basic_recover_async(self, requeue=False):
        return self.send_method(spec.Basic.RecoverAsync, 'b', (requeue,))

def basic_reject(self, delivery_tag, requeue, argsig='Lb'):
        """Reject an incoming message.

This method allows a client to reject a message.  It can be
        used to interrupt and cancel large incoming messages, or
        return untreatable messages to their original queue.

RULE:

The server SHOULD be capable of accepting and process the
            Reject method while sending message content with a Deliver
            or Get-Ok method.  I.e. the server should read and process
            incoming methods while sending output frames.  To cancel a
            partially-send content, the server sends a content body
            frame of size 1 (i.e. with no data except the frame-end
            octet).

RULE:

The server SHOULD interpret this method as meaning that
            the client is unable to process the message at this time.

RULE:

A client MUST NOT use this method as a means of selecting
            messages to process.  A rejected message MAY be discarded
            or dead-lettered, not necessarily passed to another
            client.

PARAMETERS:
            delivery_tag: longlong

server-assigned delivery tag

The server-assigned and channel-specific delivery tag

RULE:

The server MUST NOT use a zero value for delivery
                    tags.  Zero is reserved for client use, meaning "all
                    messages so far received".

requeue: boolean

requeue the message

If this field is False, the message will be discarded.
                If this field is True, the server will attempt to
                requeue the message.

RULE:

The server MUST NOT deliver the message to the
                    same client within the context of the current
                    channel.  The recommended strategy is to attempt
                    to deliver the message to an alternative consumer,
                    and if that is not possible, to move the message
                    to a dead-letter queue.  The server MAY use more
                    sophisticated tracking to hold the message on the
                    queue and redeliver it to the same client at a
                    later stage.
        """
        return self.send_method(
            spec.Basic.Reject, argsig, (delivery_tag, requeue),
        )

def _on_basic_return(self, reply_code, reply_text,
                         exchange, routing_key, message):
        """Return a failed message.

This method returns an undeliverable message that was
        published with the "immediate" flag set, or an unroutable
        message published with the "mandatory" flag set. The reply
        code and text provide information about the reason that the
        message was undeliverable.

PARAMETERS:
            reply_code: short

The reply code. The AMQ reply codes are defined in AMQ
                RFC 011.

reply_text: shortstr

The localised reply text.  This text can be logged as an
                aid to resolving issues.

exchange: shortstr

Specifies the name of the exchange that the message
                was originally published to.

routing_key: shortstr

Message routing key

Specifies the routing key name specified when the
                message was published.
        """
        exc = error_for_code(
            reply_code, reply_text, spec.Basic.Return, ChannelError,
        )
        handlers = self.events.get('basic_return')
        if not handlers:
            raise exc
        for callback in handlers:
            callback(exc, exchange, routing_key, message)

#############
    #
    #  Tx
    #
    #
    # work with standard transactions
    #
    # Standard transactions provide so-called "1.5 phase commit".  We
    # can ensure that work is never lost, but there is a chance of
    # confirmations being lost, so that messages may be resent.
    # Applications that use standard transactions must be able to
    # detect and ignore duplicate messages.
    #
    # GRAMMAR::
    #
    #     tx                  = C:SELECT S:SELECT-OK
    #                         / C:COMMIT S:COMMIT-OK
    #                         / C:ROLLBACK S:ROLLBACK-OK
    #
    # RULE:
    #
    #     An client using standard transactions SHOULD be able to
    #     track all messages received within a reasonable period, and
    #     thus detect and reject duplicates of the same message. It
    #     SHOULD NOT pass these to the application layer.
    #
    #

def tx_commit(self):
        """Commit the current transaction.

This method commits all messages published and acknowledged in
        the current transaction.  A new transaction starts immediately
        after a commit.
        """
        return self.send_method(spec.Tx.Commit, wait=spec.Tx.CommitOk)

def tx_rollback(self):
        """Abandon the current transaction.

This method abandons all messages published and acknowledged
        in the current transaction.  A new transaction starts
        immediately after a rollback.
        """
        return self.send_method(spec.Tx.Rollback, wait=spec.Tx.RollbackOk)

def tx_select(self):
        """Select standard transaction mode.

This method sets the channel to use standard transactions.
        The client must use this method at least once on a channel
        before using the Commit or Rollback methods.
        """
        return self.send_method(spec.Tx.Select, wait=spec.Tx.SelectOk)

def confirm_select(self, nowait=False):
        """Enable publisher confirms for this channel.

Note: This is an RabbitMQ extension.

Can now be used if the channel is in transactional mode.

:param nowait:
            If set, the server will not respond to the method.
            The client should not wait for a reply method. If the
            server could not complete the method it will raise a channel
            or connection exception.
        """
        return self.send_method(
            spec.Confirm.Select, 'b', (nowait,),
            wait=None if nowait else spec.Confirm.SelectOk,
        )

def _on_basic_ack(self, delivery_tag, multiple):
        for callback in self.events['basic_ack']:
            callback(delivery_tag, multiple)

def _on_basic_nack(self, delivery_tag, multiple):
        for callback in self.events['basic_nack']:
            callback(delivery_tag, multiple)

cmd: