/usr/share/zsh/5.5.1/functions
Edit: /usr/share/zsh/5.5.1/functions/_path_files (27945B)
#autoload
local -a match mbegin mend
# Look for glob qualifiers. Do this first: if we're really
# in a glob qualifier, we don't actually want to expand
# the earlier part of the path. We can't expand inside
# parentheses otherwise, so as we test that successfully
# we should be able to commit to glob qualifiers here.
#
# Extra nastiness to be careful about a quoted parenthesis.
# The initial tests look for parentheses with zero or an
# even number of backslashes in front. We also require that
# there was at least one character before the parenthesis for
# a bare glob qualifier.
# The later test looks for an outstanding quote.
if _have_glob_qual $PREFIX; then
local ret=1
compset -p ${#match[1]}
compset -S '[^\)\|\~]#(|\))'
if [[ $_comp_caller_options[extendedglob] == on ]] && compset -P '\#'; then
_globflags && ret=0
else
if [[ $_comp_caller_options[extendedglob] == on ]]; then
local -a flags
flags=(
'#:introduce glob flag'
)
_describe -t globflags "glob flag" flags -Q -S '' && ret=0
fi
_globquals && ret=0
fi
return ret
fi
# Utility function for in-path completion. This allows `/u/l/b
'
# to complete to `/usr/local/bin'.
local linepath realpath donepath prepath testpath exppath skips skipped
local tmp1 tmp2 tmp3 tmp4 i orig eorig pre suf tpre tsuf opre osuf cpre
local pats haspats ignore pfx pfxsfx sopt gopt opt sdirs ignpar cfopt listsfx
local nm=$compstate[nmatches] menu matcher mopts sort mid accex fake
local listfiles listopts tmpdisp origtmp1 Uopt
local accept_exact_dirs path_completion
integer npathcheck
local -a Mopts
typeset -U prepaths exppaths
exppaths=()
# Get the options.
zparseopts -a mopts \
'P:=pfx' 'S:=pfxsfx' 'q=pfxsfx' 'r:=pfxsfx' 'R:=pfxsfx' \
'W:=prepaths' 'F:=ignore' 'M+:=matcher' \
J+: V+: X+: 1 2 n 'f=tmp1' '/=tmp1' 'g+:-=tmp1'
sopt="-${(@j::M)${(@)tmp1#-}#?}"
(( $tmp1[(I)-[/g]*] )) && haspats=yes
(( $tmp1[(I)-g*] )) && gopt=yes
if (( $tmp1[(I)-/] )); then
pats="${(@)${(@M)tmp1:#-g*}#-g}"
pats=( '*(-/)' ${${(z):-x $pats}[2,-1]} )
else
pats="${(@)${(@M)tmp1:#-g*}#-g}"
pats=( ${${(z):-x $pats}[2,-1]} )
fi
pats=( "${(@)pats:# #}" )
if (( $#pfx )); then
compset -P "${(b)pfx[2]}" || pfxsfx=( "$pfx[@]" "$pfxsfx[@]" )
fi
if (( $#prepaths )); then
tmp1="${prepaths[2]}"
if [[ "$tmp1[1]" = '(' ]]; then
prepaths=( ${^=tmp1[2,-2]%/}/ )
elif [[ "$tmp1[1]" = '/' ]]; then
prepaths=( "${tmp1%/}/" )
else
prepaths=( ${(P)^tmp1%/}/ )
(( ! $#prepaths )) && prepaths=( ${tmp1%/}/ )
fi
(( ! $#prepaths )) && prepaths=( '' )
else
prepaths=( '' )
fi
if (( $#ignore )); then
if [[ "${ignore[2]}" = \(* ]]; then
ignore=( ${=ignore[2][2,-2]} )
else
ignore=( ${(P)ignore[2]} )
fi
fi
# If we were given no file selection option, we behave as if we were given
# a `-f'.
if [[ "$sopt" = -(f|) ]]; then
if [[ -z "$gopt" ]]; then
sopt='-f'
pats=('*')
else
unset sopt
fi
fi
if (( ! $mopts[(I)-[JVX]] )); then
local expl
if [[ -z "$gopt" && "$sopt" = -/ ]]; then
_description directories expl directory
else
_description files expl file
fi
tmp1=$expl[(I)-M*]
if (( tmp1 )); then
if (( $#matcher )); then
matcher[2]="$matcher[2] $expl[1+tmp1]"
else
matcher=(-M "$expl[1+tmp1]")
fi
fi
mopts=( "$mopts[@]" "$expl[@]" )
fi
# If given no `-F' option, we may want to use $fignore, turned into patterns.
[[ -z "$_comp_no_ignore" && $#ignore -eq 0 &&
( -z $gopt || "$pats" = \ #\*\ # ) && -n $FIGNORE ]] &&
ignore=( "?*${^fignore[@]}" )
if (( $#ignore )); then
_comp_ignore=( "$_comp_ignore[@]" "$ignore[@]" )
(( $mopts[(I)-F] )) || mopts=( "$mopts[@]" -F _comp_ignore )
fi
if [[ $#matcher -eq 0 && -o nocaseglob ]]; then
# If globbing is case insensitive and there's no matcher,
# do case-insensitive matching.
matcher=( -M 'm:{a-zA-Z}={A-Za-z}' )
fi
if (( $#matcher )); then
# Add the current matcher to the options to compadd.
mopts=( "$mopts[@]" "$matcher[@]" )
fi
if zstyle -s ":completion:${curcontext}:" file-sort tmp1; then
case "$tmp1" in
*size*) sort=oL;;
*links*) sort=ol;;
*(time|date|modi)*) sort=om;;
*access*) sort=oa;;
*(inode|change)*) sort=oc;;
*) sort=on;;
esac
[[ "$tmp1" = *rev* ]] && sort[1]=O
[[ "$tmp1" = *follow* ]] && sort="-${sort}-"
if [[ "$sort" = on ]]; then
sort=
else
mopts=( "${(@)mopts/#-J/-V}" )
tmp2=()
for tmp1 in "$pats[@]"; do
if _have_glob_qual "$tmp1" complete; then
# unbalanced parenthesis is correct: match[1] contains the start,
# match[5] doesn't contain the end.
tmp2+=( "${match[1]}#q${sort})(${match[5]})" )
else
tmp2+=( "${tmp1}(${sort})" )
fi
done
pats=( "$tmp2[@]" )
fi
fi
# Check if we have to skip over sequences of slashes. The value of $skips
# is used below to match the pathname components we always have to accept
# immediately.
if zstyle -t ":completion:${curcontext}:paths" squeeze-slashes; then
skips='((.|..|)/)##'
else
skips='((.|..)/)##'
fi
zstyle -s ":completion:${curcontext}:paths" special-dirs sdirs
zstyle -t ":completion:${curcontext}:paths" list-suffixes &&
listsfx=yes
[[ "$pats" = ((|*[[:blank:]])\*(|[[:blank:]]*|\([^[:blank:]]##\))|*\([^[:blank:]]#/[^[:blank:]]#\)*) ]] &&
sopt=$sopt/
zstyle -a ":completion:${curcontext}:paths" accept-exact accex
zstyle -a ":completion:${curcontext}:" fake-files fake
zstyle -s ":completion:${curcontext}:" ignore-parents ignpar
zstyle -t ":completion:${curcontext}:paths" accept-exact-dirs &&
accept_exact_dirs=1
zstyle -T ":completion:${curcontext}:paths" path-completion &&
path_completion=1
if [[ -n "$compstate[pattern_match]" ]]; then
if { [[ -z "$SUFFIX" ]] && _have_glob_qual "$PREFIX" complete; } ||
_have_glob_qual "$SUFFIX" complete; then
# Copy all glob qualifiers from the line to
# the patterns used when generating matches
tmp3=${match[5]}
if [[ -n "$SUFFIX" ]]; then
SUFFIX=${match[2]}
else
PREFIX=${match[2]}
fi
tmp2=()
for tmp1 in "$pats[@]"; do
if _have_glob_qual "$tmp1" complete; then
# unbalanced parenthesis is correct: match[1] contains the start,
# match[5] doesn't contain the end.
tmp2+=( "${match[1]}${tmp3}${match[5]})")
else
tmp2+=( "${tmp1}(${tmp3})" )
fi
done
pats=( "$tmp2[@]" )
fi
fi
# We get the prefix and the suffix from the line and save the whole
# original string. Then we see if we will do menu completion.
pre="$PREFIX"
suf="$SUFFIX"
opre="$PREFIX"
osuf="$SUFFIX"
orig="${PREFIX}${SUFFIX}"
eorig="$orig"
[[ $compstate[insert] = (*menu|[0-9]*) || -n "$_comp_correct" ||
( -n "$compstate[pattern_match]" &&
"${orig#\~}" != (|*[^\\])[][*?#~^\|\<\>]* ) ]] && menu=yes
if [[ -n "$_comp_correct" ]]; then
cfopt=-
Uopt=-U
else
Mopts=(-M "r:|/=* r:|=*")
fi
# Now let's have a closer look at the string to complete.
if [[ "$pre" = [^][*?#^\|\<\>\\]#(\`[^\`]#\`|\$)*/* && "$compstate[quote]" != \' ]]; then
# If there is a parameter expansion in the word from the line, we try
# to complete the beast by expanding the prefix and completing anything
# after the first slash after the parameter expansion.
# This fails for things like `f/$foo/b/' where the first `f' is
# meant as a partial path.
linepath="${(M)pre##*\$[^/]##/}"
function {
# do not treat an unset parameter expansion as the empty string
setopt localoptions nounset
eval 'realpath=${(e)~linepath}' 2>/dev/null
}
[[ -z "$realpath" || "$realpath" = "$linepath" ]] && return 1
pre="${pre#${linepath}}"
i='[^/]'
i="${#linepath//$i}"
orig="${orig[1,(in:i:)/][1,-2]}"
donepath=
prepaths=( '' )
elif [[ "$pre[1]" = \~ && "$compstate[quote]" = (|\`) ]]; then
# It begins with `~', so remember anything before the first slash to be able
# to report it to the completion code. Also get an expanded version of it
# (in `realpath'), so that we can generate the matches. Then remove that
# prefix from the string to complete, set `donepath' to build the correct
# paths and make sure that the loop below is run only once with an empty
# prefix path by setting `prepaths'.
linepath="${pre[2,-1]%%/*}"
if [[ -z "$linepath" ]]; then
realpath="${HOME%/}/"
elif [[ "$linepath" = ([-+]|)[0-9]## ]]; then
if [[ "$linepath" != [-+]* ]]; then
tmp1="$linepath"
else
if [[ "$linepath" = -* ]]; then
tmp1=$(( $#dirstack $linepath ))
else
tmp1=$linepath[2,-1]
fi
[[ -o pushdminus ]] && tmp1=$(( $#dirstack - $tmp1 ))
fi
if (( ! tmp1 )); then
realpath=$PWD/
elif [[ tmp1 -le $#dirstack ]]; then
realpath=$dirstack[tmp1]/
else
_message 'not enough directory stack entries'
return 1
fi
elif [[ "$linepath" = [-+] ]]; then
realpath=${~:-\~$linepath}/
else
eval "realpath=~${linepath}/" 2>/dev/null
if [[ -z "$realpath" ]]; then
_message "unknown user \`$linepath'"
return 1
fi
fi
linepath="~${linepath}/"
[[ "$realpath" = "$linepath" ]] && return 1
pre="${pre#*/}"
orig="${orig#*/}"
donepath=
prepaths=( '' )
else
# If the string does not start with a `~' we don't remove a prefix from the
# string.
linepath=
realpath=
if zstyle -s ":completion:${curcontext}:" preserve-prefix tmp1 &&
[[ -n "$tmp1" && "$pre" = (#b)(${~tmp1})* ]]; then
pre="$pre[${#match[1]}+1,-1]"
orig="$orig[${#match[1]}+1,-1]"
donepath="$match[1]"
prepaths=( '' )
elif [[ "$pre[1]" = / ]]; then
# If it is a absolute path name, we remove the first slash and put it in
# `donepath' meaning that we treat it as the path that was already handled.
# Also, we don't use the paths from `-W'.
pre="$pre[2,-1]"
orig="$orig[2,-1]"
donepath='/'
prepaths=( '' )
else
# The common case, we just use the string as it is, unless it begins with
# `./' or `../' in which case we don't use the paths from `-W'.
[[ "$pre" = (.|..)/* ]] && prepaths=( '' )
donepath=
fi
fi
# Now we generate the matches. First we loop over all prefix paths given
# with the `-W' option.
for prepath in "$prepaths[@]"; do
# Get local copies of the prefix, suffix, and the prefix path to use
# in the following loop, which walks through the pathname components
# in the string from the line.
skipped=
cpre=
if [[ ( -n $accept_exact_dirs || -z $path_completion ) && \
${pre} = (#b)(*)/([^/]#) ]]; then
# We've been told either that we can accept an exact directory prefix
# immediately, or that path expansion is inhibited. Try the longest
# path prefix first: in the first case, this saves stats in the simple
# case and may get around automount behaviour if early components don't
# yet exist, and in the second case this is the prefix we want to keep.
#
# Explanation of substitution: For tmp1 and tpre, which are used further
# on, we need to remove quotes from everything that's not a pattern
# character, because the code that does the file generation only
# strips quotes from pattern characters (you know better than
# to ask why).
tmp1=${match[1]}
tpre=${match[2]}
tmp2=$tmp1
tmp1=${tmp1//(#b)\\(?)/$match[1]}
tpre=${tpre//(#b)\\([^\\\]\[\^\~\(\)\#\*\?])/$match[1]}
# Theory: donepath needs the quoting of special characters
# still in it. However, we need it without at this point.
# (I think.) Note this is different from the above where we're
# doing something a bit different.
tmp3=${donepath//(#b)\\(?)/$match[1]}
while true; do
if [[ -z $path_completion || -d $prepath$realpath$tmp3$tmp2 ]]; then
tmp3=$tmp3$tmp1/
# Now put donepath back the way it should be. (I think.)
donepath=${tmp3//(#b)([\\\]\[\^\~\(\)\#\*\?])/\\$match[1]}
pre=$tpre
break
elif [[ $tmp1 = (#b)(*)/([^/]#) ]]; then
tmp1=$match[1]
tpre=$match[2]/$tpre
else
break
fi
done
fi
tpre="$pre"
tsuf="$suf"
# Now we strip quoting from pattern characters, too, because
# testpath is used as a literal string. I suppose we could
# alternatively use ${~testpath} later.
#
# I'm not sure if donepath itself should be entirely unquoted at
# some point but probably not here, since we need the quoted pattern
# characters in tmp1 below (I think).
testpath="${donepath//(#b)\\([\\\]\[\^\~\(\)\#\*\?])/$match[1]}"
tmp2="${(M)tpre##${~skips}}"
tpre="${tpre#$tmp2}"
tmp1=( "$prepath$realpath$donepath$tmp2" )
# count of attemps for pws non-canonical hack
(( npathcheck = 0 ))
while true; do
origtmp1=("${tmp1[@]}")
# Get the prefix and suffix for matching.
if [[ "$tpre" = */* ]]; then
PREFIX="${tpre%%/*}"
SUFFIX=
else
PREFIX="${tpre}"
SUFFIX="${tsuf%%/*}"
fi
# Force auto-mounting. There might be a better way...
# Commented out in the hope that `pws non-canonical hack'
# down below does this for us. Can be uncommented if it
# doesn't.
# : ${^tmp1}/${PREFIX}${SUFFIX}/.(/)
# Get the matching files by globbing.
tmp2=( "$tmp1[@]" )
if [[ "$tpre$tsuf" = (#b)*/(*) ]]; then
# We are going to be looping over the leading path segments.
# This means we should not apply special-dirs handling unless
# the path tail is a fake directory that needs to be simulated,
# and we should not apply pattern matching until we are looking
# for files rather than for intermediate directories.
if [[ -n "$fake${match[1]}" ]]; then
compfiles -P$cfopt tmp1 accex "$skipped" "$_matcher $matcher[2]" "$sdirs" fake
else
compfiles -P$cfopt tmp1 accex "$skipped" "$_matcher $matcher[2]" '' fake
fi
elif [[ "$sopt" = *[/f]* ]]; then
compfiles -p$cfopt tmp1 accex "$skipped" "$_matcher $matcher[2]" "$sdirs" fake "$pats[@]"
else
compfiles -p$cfopt tmp1 accex "$skipped" "$_matcher $matcher[2]" '' fake "$pats[@]"
fi
tmp1=( $~tmp1 ) 2> /dev/null
if [[ -n "$PREFIX$SUFFIX" ]]; then
# See which of them match what's on the line.
# pws non-canonical hack which seems to work so far...
# if we didn't match by globbing, check that there is
# something to match by explicit name. This is for
# `clever' filing systems where names pop into existence
# when referenced.
#
# As suggested by Bart, to make sure the "compfiles" checks
# still work we repeat the tests above if we successfully
# find something that might need adding, but we make sure
# we only do this once for completion of each path segment.
if (( ! $#tmp1 && npathcheck == 0 )); then
(( npathcheck = 1 ))
for tmp3 in "$tmp2[@]"; do
if [[ -n $tmp3 && $tmp3 != */ ]]; then
tmp3+=/
fi
if [[ -e "$tmp3${(Q)PREFIX}${(Q)SUFFIX}" ]] then
(( npathcheck = 2 ))
fi
done
if (( npathcheck == 2 )); then
# repeat loop with same arguments
tmp1=("$origtmp1[@]")
continue
fi
fi
if (( ! $#tmp1 )); then
tmp2=( ${^${tmp2:#/}}/$PREFIX$SUFFIX )
elif [[ "$tmp1[1]" = */* ]]; then
if [[ -n "$_comp_correct" ]]; then
tmp2=( "$tmp1[@]" )
builtin compadd -D tmp1 "$matcher[@]" - "${(@)tmp1:t}"
if [[ $#tmp1 -eq 0 ]]; then
tmp1=( "$tmp2[@]" )
compadd -D tmp1 "$matcher[@]" - "${(@)tmp2:t}"
fi
else
tmp2=( "$tmp1[@]" )
compadd -D tmp1 "$matcher[@]" - "${(@)tmp1:t}"
fi
else
tmp2=( '' )
compadd -D tmp1 "$matcher[@]" -a tmp1
fi
# If no file matches, save the expanded path and continue with
# the outer loop.
if (( ! $#tmp1 )); then
if [[ "$tmp2[1]" = */* ]]; then
tmp2=( "${(@)tmp2#${prepath}${realpath}}" )
if [[ "$tmp2[1]" = */* ]]; then
tmp2=( "${(@)tmp2:h}" )
compquote tmp2
if [[ "$tmp2" = */ ]]; then
exppaths=( "$exppaths[@]" ${^tmp2}${tpre}${tsuf} )
else
exppaths=( "$exppaths[@]" ${^tmp2}/${tpre}${tsuf} )
fi
elif [[ ${tpre}${tsuf} = */* ]]; then
exppaths=( "$exppaths[@]" ${tpre}${tsuf} )
### this once was in an `else' (not `elif')
fi
fi
continue 2
fi
elif (( ! $#tmp1 )); then
# A little extra hack: if we were completing `foo/' and `foo'
# contains no files, this will normally produce no matches and other
# completers might think that's it's their time now. But if the next
# completer is _correct or something like that, this will result in
# an attempt to correct a valid directory name. So we just add the
# original string in such a case so that the command line doesn't
# change but other completers still think there are matches.
# We do this only if we weren't given a `-g' or `-/' option because
# otherwise this would keep `_files' from completing all filenames
# if none of the patterns match.
if [[ -z "$tpre$tsuf" && -n "$pre$suf" ]]; then
pfxsfx=(-S '' "$pfxsfx[@]")
### Don't remember what the break was good for. We explicitly
### execute this only when there are no matches in the directory,
### so why continue?
###
### tmp1=( "$tmp2[@]" )
### break
elif [[ -n "$haspats" && -z "$tpre$tsuf$suf" && "$pre" = */ ]]; then
PREFIX="${opre}"
SUFFIX="${osuf}"
compadd -nQS '' - "$linepath$donepath$orig"
tmp4=-
fi
continue 2
fi
if [[ -n "$ignpar" && -z "$_comp_no_ignore" &&
"$tpre$tsuf" != */* && $#tmp1 -ne 0 &&
( "$ignpar" != *dir* || "$pats" = '*(-/)' ) &&
( "$ignpar" != *..* || "$tmp1[1]" = *../* ) ]]; then
compfiles -i tmp1 ignore "$ignpar" "$prepath$realpath$donepath"
_comp_ignore+=( ${(@)ignore#$prepath$realpath$donepath} )
(( $#_comp_ignore && ! $mopts[(I)-F] )) &&
mopts=( "$mopts[@]" -F _comp_ignore )
fi
# Step over to the next component, if any.
if [[ "$tpre" = */* ]]; then
tpre="${tpre#*/}"
elif [[ "$tsuf" = */* ]]; then
tpre="${tsuf#*/}"
tsuf=
else
break
fi
# There are more components, so skip over the next components and make a
# slash be added.
#tmp1=( ${tmp1//(#b)([][()|*?^#~<>\\=])/\\${match[1]}} )
tmp2="${(M)tpre##${~skips}}"
if [[ -n "$tmp2" ]]; then
skipped="/$tmp2"
tpre="${tpre#$tmp2}"
else
skipped=/
fi
(( npathcheck = 0 ))
done
# The next loop searches the first ambiguous component.
tmp3="$pre$suf"
tpre="$pre"
tsuf="$suf"
if [[ -n "${prepath}${realpath}${testpath}" ]]
then
if [[ -o nocaseglob ]]
then
tmp1=( "${(@)tmp1#(#i)${prepath}${realpath}${testpath}}" )
else
tmp1=( "${(@)tmp1#${prepath}${realpath}${testpath}}" )
fi
fi
while true; do
# First we check if some of the files match the original string
# for this component. If there are some we remove all other
# names. This avoids having `foo' complete to `foo' and `foobar'.
# The return value is non-zero if the component is ambiguous.
compfiles -r tmp1 "${(Q)tmp3}"
tmp4=$?
if [[ "$tpre" = */* ]]; then
tmp2="${cpre}${tpre%%/*}"
PREFIX="${linepath}${donepath}${tmp2}"
SUFFIX="/${tpre#*/}${tsuf#*/}"
else
tmp2="${cpre}${tpre}"
PREFIX="${linepath}${donepath}${tmp2}"
SUFFIX="${tsuf}"
fi
# This once tested `|| [[ -n "$compstate[pattern_match]" &&
# "$tmp2" = (|*[^\\])[][*?#~^\|\<\>]* ]]' but it should now be smart
# enough to handle multiple components with patterns.
if (( tmp4 )); then
# The component we're checking is ambiguous.
# For menu completion we now add the possible completions
# for this component with the unambiguous prefix we have built
# and the rest of the string from the line as the suffix.
# For normal completion we add the rests of the filenames
# collected as the suffixes to make the completion code expand
# it as far as possible.
tmp2="$testpath"
if [[ -n "$linepath" ]]; then
compquote -p tmp2 tmp1
elif [[ -n "$tmp2" ]]; then
compquote -p tmp1
compquote tmp2
else
compquote tmp1 tmp2
fi
if [[ -z "$_comp_correct" &&
"$compstate[pattern_match]" = \* && -n "$listsfx" &&
"$tmp2" = (|*[^\\])[][*?#~^\|\<\>]* ]]; then
PREFIX="$opre"
SUFFIX="$osuf"
fi
# This once tested `-n $menu ||' but our menu-completion expert says
# that's not what we want.
if [[ -z "$compstate[insert]" ]] ||
{ ! zstyle -t ":completion:${curcontext}:paths" expand suffix &&
[[ -z "$listsfx" &&
( -n "$_comp_correct" ||
-z "$compstate[pattern_match]" || "$SUFFIX" != */* ||
"${SUFFIX#*/}" = (|*[^\\])[][*?#~^\|\<\>]* ) ]] }; then
# We have not been told to insert the match, so we are
# listing, or something.
(( tmp4 )) && zstyle -t ":completion:${curcontext}:paths" ambiguous &&
compstate[to_end]=
if [[ "$tmp3" = */* ]]; then
if [[ -z "$listsfx" || "$tmp3" != */?* ]]; then
# I think this means we are expanding some directory
# back up the path.
tmp1=("${(@)tmp1%%/*}")
_list_files tmp1 "$prepath$realpath$testpath"
compadd $Uopt -Qf "$mopts[@]" \
-p "${Uopt:+$IPREFIX}$linepath$tmp2" \
-s "/${tmp3#*/}${Uopt:+$ISUFFIX}" \
-W "$prepath$realpath$testpath" \
"$pfxsfx[@]" $Mopts \
$listopts \
-a tmp1
else
# Same with a non-empty suffix
tmp1=("${(@)^tmp1%%/*}/${tmp3#*/}")
_list_files tmp1 "$prepath$realpath$testpath"
compadd $Uopt -Qf "$mopts[@]" \
-p "${Uopt:+$IPREFIX}$linepath$tmp2" \
-s "${Uopt:+$ISUFFIX}" \
-W "$prepath$realpath$testpath" \
"$pfxsfx[@]" $Mopts \
$listopts \
-a tmp1
fi
else
_list_files tmp1 "$prepath$realpath$testpath"
compadd $Uopt -Qf "$mopts[@]" -p "${Uopt:+$IPREFIX}$linepath$tmp2" \
-s "${Uopt:+$ISUFFIX}" \
-W "$prepath$realpath$testpath" \
"$pfxsfx[@]" $Mopts \
$listopts \
-a tmp1
fi
else
# We are inserting the match into the command line.
if [[ "$tmp3" = */* ]]; then
tmp4=( $Uopt -Qf "$mopts[@]" -p "${Uopt:+$IPREFIX}$linepath$tmp2"
-W "$prepath$realpath$testpath"
"$pfxsfx[@]" $Mopts )
if [[ -z "$listsfx" ]]; then
for i in "$tmp1[@]"; do
tmpdisp=("$i")
_list_files tmpdisp "$prepath$realpath$testpath"
compadd "$tmp4[@]" -s "${Uopt:+$ISUFFIX}" $listopts - "$tmpdisp"
done
else
[[ -n "$compstate[pattern_match]" ]] && SUFFIX="${SUFFIX:s./.*/}*"
for i in "$tmp1[@]"; do
_list_files i "$prepath$realpath$testpath"
compadd "$tmp4[@]" $listopts - "$i"
done
fi
else
_list_files tmp1 "$prepath$realpath$testpath"
compadd $Uopt -Qf "$mopts[@]" -p "${Uopt:+$IPREFIX}$linepath$tmp2" \
-s "${Uopt:+$ISUFFIX}" \
-W "$prepath$realpath$testpath" \
"$pfxsfx[@]" $Mopts \
$listopts \
-a tmp1
fi
fi
tmp4=-
# Found an ambiguity, stop the loop over components.
break
fi
# If we have checked all components, we stop now and add the
# strings collected after the loop.
if [[ "$tmp3" != */* ]]; then
tmp4=
break
fi
# Otherwise we add the unambiguous component to `testpath' and
# take it from the filenames.
testpath="${testpath}${tmp1[1]%%/*}/"
tmp3="${tmp3#*/}"
if [[ "$tpre" = */* ]]; then
if [[ -z "$_comp_correct" && -n "$compstate[pattern_match]" &&
"$tmp2" = (|*[^\\])[][*?#~^\|\<\>]* ]]; then
cpre="${cpre}${tmp1[1]%%/*}/"
else
cpre="${cpre}${tpre%%/*}/"
fi
tpre="${tpre#*/}"
elif [[ "$tsuf" = */* ]]; then
[[ "$tsuf" != /* ]] && mid="$testpath"
if [[ -z "$_comp_correct" && -n "$compstate[pattern_match]" &&
"$tmp2" = (|*[^\\])[][*?#~^\|\<\>]* ]]; then
cpre="${cpre}${tmp1[1]%%/*}/"
else
cpre="${cpre}${tpre}/"
fi
tpre="${tsuf#*/}"
tsuf=
else
tpre=
tsuf=
fi
tmp1=( "${(@)tmp1#*/}" )
done
if [[ -z "$tmp4" ]]; then
# I think this means it's finally time to add the matches,
# now we've collected contributions from all components.
if [[ "$mid" = */ ]]; then
# This seems to mean we're completing in the middle of the
# command line argument, i.e. not in the last component.
# There are two cases, depending on whether this part of
# the path itself has multiple directories or not.
PREFIX="${opre}"
SUFFIX="${osuf}"
tmp4="${testpath#${mid}}"
if [[ $mid = */*/* ]]; then
# Multiple levels of directory involved.
tmp3="${mid%/*/}"
tmp2="${${mid%/}##*/}"
if [[ -n "$linepath" ]]; then
compquote -p tmp3
else
compquote tmp3
fi
compquote tmp4 tmp2 tmp1
for i in "$tmp1[@]"; do
_list_files tmp2 "$prepath$realpath${mid%/*/}"
compadd $Uopt -Qf "$mopts[@]" -p "${Uopt:+$IPREFIX}$linepath$tmp3/" \
-s "/$tmp4$i${Uopt:+$ISUFFIX}" \
-W "$prepath$realpath${mid%/*/}/" \
"$pfxsfx[@]" $Mopts $listopts - "$tmp2"
done
else
# Simpler case with fewer directories: avoid double counting.
tmp2="${${mid%/}##*/}"
compquote tmp4 tmp2 tmp1
for i in "$tmp1[@]"; do
_list_files tmp2 "$prepath$realpath${mid%/*/}"
compadd $Uopt -Qf "$mopts[@]" -p "${Uopt:+$IPREFIX}$linepath" \
-s "/$tmp4$i${Uopt:+$ISUFFIX}" \
-W "$prepath$realpath" \
"$pfxsfx[@]" $Mopts $listopts - "$tmp2"
done
fi
else
# This would seem to be where we're completing the last
# component of the path -- the normal one, in other words.
if [[ "$osuf" = */* ]]; then
PREFIX="${opre}${osuf}"
SUFFIX=
else
PREFIX="${opre}"
SUFFIX="${osuf}"
fi
tmp4="$testpath"
if [[ -n "$linepath" ]]; then
compquote -p tmp4 tmp1
elif [[ -n "$tmp4" ]]; then
compquote -p tmp1
compquote tmp4
else
compquote tmp4 tmp1
fi
if [[ -z "$_comp_correct" && -n "$compstate[pattern_match]" &&
"${PREFIX#\~}$SUFFIX" = (|*[^\\])[][*?#~^\|\<\>]* ]]; then
# Pattern match, we need to be clever with matchers.
tmp1=("$linepath$tmp4${(@)^tmp1}")
_list_files tmp1 "$prepath$realpath"
compadd -Qf -W "$prepath$realpath" "$pfxsfx[@]" "$mopts[@]" \
-M "r:|/=* r:|=*" $listopts -a tmp1
else
# Not a pattern match
_list_files tmp1 "$prepath$realpath$testpath"
compadd $Uopt -Qf -p "${Uopt:+$IPREFIX}$linepath$tmp4" \
-s "${Uopt:+$ISUFFIX}" \
-W "$prepath$realpath$testpath" \
"$pfxsfx[@]" "$mopts[@]" $Mopts $listopts -a tmp1
fi
fi
fi
done
# If we are configured to expand paths as far as possible and we collected
# expanded paths that are different from the string on the line, we add
# them as possible matches. Do that only if we are currently trying the
# last entry in the matcher-list style, otherwise other match specs might
# make the suffix that didn't match this time match in one of the following
# attempts.
if [[ _matcher_num -eq ${#_matchers} ]] &&
zstyle -t ":completion:${curcontext}:paths" expand prefix &&
[[ nm -eq compstate[nmatches] && $#exppaths -ne 0 &&
"$linepath$exppaths" != "$eorig" ]]; then
PREFIX="${opre}"
SUFFIX="${osuf}"
compadd -Q "$mopts[@]" -S '' -M "r:|/=* r:|=*" -p "$linepath" -a exppaths
fi
[[ nm -ne compstate[nmatches] ]]